Titebond | Cold Press Veneer Adhesive 3,8l (1 Gallon)
Cold Press Veneer Adhesive
Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.
- Economical alternative to contact cement
- Formulated to minimize "bleed-through"
- Moderate speed of set
- No harmful vapours
- Safe - non-flammable
Application Guidelines
- Application Temperature: Above 50°F
- Open assembly time: 15 minutes (70°F. / 50% RH)
- Total assembly time: 15 to 20 minutes (70°F. / 50% RH)
- Minimum required spread: 6 mils (typical), or 250 square feet per gallon
- Required pressure for application: 100 to 250 psi, depending on substrate
- Method of application: For most consistent coverage a mechanical spreader is recommended
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess
Original: $47.37
-70%$47.37
$14.21Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Cold Press Veneer Adhesive
Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.
- Economical alternative to contact cement
- Formulated to minimize "bleed-through"
- Moderate speed of set
- No harmful vapours
- Safe - non-flammable
Application Guidelines
- Application Temperature: Above 50°F
- Open assembly time: 15 minutes (70°F. / 50% RH)
- Total assembly time: 15 to 20 minutes (70°F. / 50% RH)
- Minimum required spread: 6 mils (typical), or 250 square feet per gallon
- Required pressure for application: 100 to 250 psi, depending on substrate
- Method of application: For most consistent coverage a mechanical spreader is recommended
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess
